Flat Belt Pulleys, Belting, Splicing
     
CAST IRON FLAT BELT PULLEYS
We have very nice cast iron pulleys. These 4"X4" cast iron pulleys are patterned from an original with machined surfaces, and they look just as good! When entering these on our on-line order form please enter the part number in the part number field and the following in the description field as follows: Pulley, 1-1/2 shaft, 3/8 keyway. Put in the desired size for shaft and key. DO NOT USE QUOTE MARKS for inch designation.

Part# Description Price
HM925 With set screw, 1" hole 65.00
HM9251 With set screw, 1-1/8" hole 65.00
HM9252 With set screw, 1-1/4" hole 65.00
HM9253 With set screw, 1-3/8" hole 65.00
HM9254 With set screw, 1-1/2" hole 65.00
HM926 With set screw and keyway*, 1" hole 72.50
HM9261 With set screw and keyway*, 1-1/8" hole 72.50
HM9262 With set screw and keyway*, 1-1/4" hole 72.50
HM9263 With set screw and keyway*, 1-3/8" hole 72.50
HM9264 With set screw and keyway*, 1-1/2" hole 72.50
*Please give width of keyway when ordering
             
FLAT BELTING
The belting we sell is a rubber-canvas type of belt like you would expect to find on old equipment (not the shiny plastic looking belts found in most hardwares today). We can install clipper lacing in your belt at an additional cost of $10.00 (includes lacing). Usually 3 ply belting suits most collector's, but on larger engines and equipment a heavier 4 ply may be desired. Our 3 ply is approximately 3/16" thick and our 4 ply is approximately 1/4" thick. We list the most common sizes here but can supply it in any width - call us for a quote!
 
3 PLY

4 PLY

Part# Width Price/ft. Part# Width Price/ft.
B31 1" 2.00 Not sold in 1" width
B31A 1-1/4" 2.25 Not sold in 1-1/4" width
B31B 1-1/2" 2.50 Not sold in 1-1/2" width
B31C 1-3/4" 2.75 Not sold in 1-3/4" width
B32 2" 3.00 B42 2" 3.50
B33 3" 3.75 B43 3" 4.75
B34 4" 4.00 B44 4" 5.50
B35 5" 4.50 B45 5" 6.25
B36 6" 5.25 B46 6" 7.50
       
FLAT BELT LACING - CLIPPER STYLE
Special tool needed to use





Part# For Belt Thickness Length Price
CL-25LP 1/16"-1/8" 6" 2.00
CL-1 1/8"-5/32" 6" 2.00
CL-2 5/32"-3/16" 12" 2.50
CL-3 3/16"-7/32" 12" 2.50
CL-4 7/32"-1/4" 12" 2.50
CL-5 9/32"-5/16" 12" 3.00
CL-6 5/16"-3/8" 12" 3.50
 
FLAT BELT LACING - ALLIGATOR STYLE
No special tools required to use



Part# For Belt Thickness Length Price
AL-7 3/32"-9/64" 12" 2.50
AL-15 1/8"-5/32" 12" 3.00
AL-20 5/32"-3/16" 12" 3.50
AL-25 3/16"-7/32" 12" 3.50
AL-27 1/4"-9/32" 12" 3.50
AL-35 9/32"-5/16" 12" 3.75
AL-45 5/16"-3/8" 12" 4.50
     
ROUND LEATHER BELT



Part# Size Price/ft.
RL101 1/8" 1.75
RL102 3/16" 1.75
RL103 1/4" 2.25
RL104 3/8" 3.00
 
RL200 Belt Hook - normal use one per belt .75ea